Liquid tank semi-trailer TSA 30.3-1 ADR
Volume approx. 30 m³
Product information
| Tank | Self-supporting cylindircal pressure tank made of V4A stainless steel. |
| Compartments | Single compartment with 3 baffles. |
| Manholes | 1 x DN 500 3 x additional opening for cleaning DN 300 |
| Discharge | One material discharge outlet equipped with interval V4A stainless steel, bottom discharge valve DN 100/80, operated pneumatically. Leading out to the rear and is equipped with a V4A stainless steel butterfly valve DN 80 and TW-coupling with blank cap. |
| Heating | Pressure heater for up to 3 bar working pressure with 4 stainless steel heating coils fitted in vessel base. Supplied by hot water or steam. |
| Insulation | 100 mm special insulation consisting of 50 mm mineral wool and 50 mm PU hard foam. |
| Outer shell | Highly polished stainless steel. Ends made of plastic. |
| Catwalk | Aluminium catwalk, 400 mm wide, handrail and ladder made of electro-polished stainless steel. |
| Running gear | 3 x 9 t disc brake axle assembly on FFB aluminium hanger brackets, low maintenance axles and air suspension. |
| Tyres | 6 x 385/65 R 22.5 fitted on forged and dull finished aluminium rims (Alcoa). |
| Brakes | ABS/EBS brake system in accordance with EU regulations. Spring loading park brake operating on 2 axles. |
| General information | 2 stainless steel hose carriers, 1 toolbox, an analogue thermometer, customs seal, 1 stainless steel hose deflector. Lighting, underride protection and side protection in accordance with EU regulations. |
| Weights | Total weight: 34,000 kg Tare weight: approx. 6,700 kg Payload: approx. 27,300 kg |
28.02.2014